Exhausts Benelli TRK 502 X 2018-2020

A 19-inch spoked front wheel, a raised side-mounted exhaust, suspension with increased travel and an adventure vocation that its road-going sibling simply doesn't have: the Benelli TRK 502 X 2018-2020 is the version of the 502 platform built for those who don't stop where the tarmac ends. It shares the Euro 4 parallel-twin 500 cc engine and trellis frame with the standard TRK 502, but the chassis has been revised to offer greater stability on rough surfaces and a taller, more commanding riding position. In Italy it quickly became a benchmark among affordable adventure bikes, partly thanks to its A2 licence compatibility. The stock silencer, mounted high on the right side to protect the exhaust system during off-road use, does its job but leaves room for those looking for a more distinctive sound and a few kilos less on the bike. Here you'll find our type-approved sport silencers, developed specifically for this version. To browse the full range, check out our exhausts for Benelli.

The products in this category are slip-on silencers, designed to replace only the original end can on the TRK 502 X. The headers and the front section of the exhaust system remain standard: the upgrade concerns the final section only. Each silencer comes with a complete fitting kit, compatible with the bike's original mounting points, for a straightforward installation with no structural modifications. For the best results, we recommend having the silencer fitted by a qualified mechanic or a trusted workshop.

Fitting a sport silencer to the TRK 502 X makes a noticeable difference in two key areas. The first is weight: the original end can is fairly heavy and mounted high up, which affects the mass distribution. A lighter silencer improves handling, especially during slow manoeuvres and on dirt tracks where the bike works harder. The second is sound: the parallel-twin on the 502 X has a naturally subdued tone, and a sport silencer gives it a more defined and present voice - without excess, but with a more recognisable character. These are real improvements linked to the silencer swap, not promises of a radical transformation.

Every Roadsitalia exhaust is handmade in Lombardy, in the province of Bergamo. Each silencer is made to order and undergoes careful quality control before dispatch. Buying from Roadsitalia means your silencer is sold directly, with no middlemen, and whoever answers your questions knows these exhausts inside out.

All silencers come with a standard dB killer included, ensuring compliance with the noise limits required by type approval. The dB killer is not officially removable: its removal voids the silencer's homologation. For those who prefer an even quieter sound, some models offer the No-Noise version: a welded internal filter that further reduces decibel levels without significantly affecting performance. The No-Noise version, where available, can be selected directly on the product page.

Since only the silencer is being replaced, the ECU on the TRK 502 X does not normally require any remapping. The engine management system continues to operate with its original parameters, and the installation does not typically cause any faults or electronic warnings.

Regarding production times, as each piece is made to order, up-to-date lead times are always visible during checkout. A tracking code is automatically sent once the order is dispatched.

If you have any questions about compatibility, fitting or choosing the right model for your TRK 502 X, we invite you to check the FAQ section on the website or contact us directly via the Contact page or chat. We're happy to answer any technical or practical question.

To optimise the ECU as well, our Alientech Powergate 4 remapping kit is available, with up to 4 maps included, calibrated on the bike configuration: Benelli TRK 502 e 502 X (2017-2018) and Benelli TRK 502 e 502 X (2019-2024). The map also removes the MIL warning light, which can come on with the non-catalysed version.

Below you'll find the product list with all the silencers available for the Benelli TRK 502 X 2018-2020. The differences between models are mainly aesthetic: shape, material and finish. We invite you to visit each product page to see detailed photos, read the technical specifications and configure the silencer that best suits your needs, including selecting the No-Noise version from the drop-down menu where available.