Exhausts Aprilia Dorsoduro 900 2017-2020

The Aprilia Dorsoduro 900 is one of those bikes that needs no introduction among those who truly love to ride. Produced from 2017 to 2020, it carried forward the legacy of the 750 and took it to the next level thanks to the 90° V-twin engine displacing 896 cc, delivering 95 HP and, more importantly, 90 Nm of torque available from as low as 6,500 rpm. The character of this motard is all in the way it pulls: full, rich, with a throttle response that changes dramatically depending on the map selected through the Ride-by-Wire system. The mixed steel trellis and aluminium plate frame gives it remarkable agility for the category, and the electronics package with traction control and ABS rounds off a very solid technical platform for a bike designed first and foremost for fun on the road. If you own a Dorsoduro 900 and are looking for a concrete way to personalise it, you're in the right section: here you'll find our exhausts for Aprilia dedicated to this model.

The silencers we offer for the Dorsoduro 900 are designed as replacement silencers for the original under-seat end cans. This means a pair of silencers that replaces the two stock mufflers, while keeping the headers and the rest of the original exhaust system intact. Each kit includes the pair of silencers, the necessary fitting hardware and gaskets for connection to the existing mounting points. Installation uses the same attachment points provided by Aprilia, with no modifications required to the frame or the sub-seat structure. We nevertheless recommend having the installation carried out by a qualified mechanic, especially considering the under-seat position which requires care in managing clearances and correctly torquing all fasteners.

The most immediate benefit of fitting a pair of aftermarket silencers on the Dorsoduro 900 is weight reduction. The stock end cans, designed to meet homologation limits with wide margins, are inevitably heavier than an aftermarket product built with lighter materials. The weight saving in the high rear area, on a bike whose centre of gravity is already optimised for active riding, is noticeable. The second aspect is the exhaust note: the 90° V-twin has a naturally distinctive sound, and our silencers allow you to bring it out with a more defined and present tone, without distorting the engine's character but simply making it more expressive. We don't promise performance revolutions: this is a silencer replacement, and the real benefits are related to weight saving, sound and the overall aesthetics of the bike.

Every exhaust is handmade in Italy, in the province of Bergamo. Handcrafted in Lombardy, each piece is carefully followed at every stage, from material shaping through to welding and surface finishing. Every pair of silencers for the Dorsoduro 900 is made to order: this means the product you receive has been built specifically for your order and subjected to a careful quality check before dispatch. Sold directly, with no intermediaries, these silencers come with faster service, and whoever answers you knows these exhausts inside out, so any technical question gets a competent reply.

By replacing only the silencers, the catalytic section of the original system remains in place and continues to perform its function. This means that ECU remapping or electronic modifications are not normally required. The engine management system continues to operate with its own parameters, and replacing only the end cans does not alter the operating conditions of the upstream system.

All our silencers come fitted with a standard dB killer. The dB killer is not officially removable: its removal voids the homologation. For those who want an even quieter sound level, the No-Noise version is available on selected models - a welded internal baffle that further reduces decibel levels without significantly affecting performance. No-Noise availability can be checked directly on the product page, where it can be selected from the drop-down options menu.

Regarding production times, as every exhaust is made to order, up-to-date lead times are always visible during checkout. Once your order has been dispatched, you will automatically receive tracking information to follow the delivery.

If you have questions about compatibility, installation or the different finishes available, we invite you to check the FAQ section of the site or contact us directly via the Contact page or the chat. We're happy to answer any technical query.

Below you'll find the product list available for the Aprilia Dorsoduro 900. The differences between the various models are mainly aesthetic: silencer shape, construction material and type of finish. Within each product page you can select options such as No-Noise from the drop-down menu. We recommend entering each product page to view detailed photos, read the full technical specifications and configure the pair of silencers best suited to your Dorsoduro.