Search here...
Roadsitalia Exhaust
The Ténéré name evokes something specific: the XT 600Z of 1983, the bike that dominated the Dakar Rally in the years when the Dakar was still a genuine adventure, and that turned the Ténéré desert into a legendary place for motorcyclists around the world. When Yamaha decides to bring it back in 2019, it does not do so with a touring bike dressed up as an enduro: the engine is the CP2 parallel twin of 689cc shared with the MT-07 and Tracer 700, but completely remapped to prioritise torque at low and mid revs, with the crossplane 270-degree firing order that generates that irregular and unmistakable pulse, and a genuine enduro chassis with 21-inch front wheel, steel double-cradle frame and long-travel suspension. On a bike built to take you far, with an engine that expresses itself best when allowed to breathe, the sports exhaust is not a styling accessory: it is a modification that affects the entire sonic and riding experience. Our sports exhausts for the Ténéré 700 bring out that CP2 pulse which is already, in standard form, one of the most engaging elements of the bike. Find the models divided by generation in the dedicated subcategories, and the full range of Yamaha exhausts in the exhausts for Yamaha section on our website.
The products in this category are sports exhausts designed to replace the original muffler on the Ténéré 700. The work concerns the lateral end can only: the original headers and the front section of the exhaust system remain in place. Fitting is carried out on the bike's original mounting points with no special adapters required, and each exhaust is supplied with a complete fitting kit. To ensure a proper seal and correct alignment, we recommend having the installation carried out by a qualified mechanic. Always check compatibility with your year of manufacture on the product page.
The weight saving over the stock muffler is tangible and meaningful on the whole bike — not a trivial point on an enduro designed for off-road use, where every kilogram saved has a direct impact on handling. In terms of sound, the Ténéré 700's CP2 270-degree twin — already pulsating and characterful, with that low-rev growl that sets it apart from any four-cylinder — gains a more open and defined note with a sports exhaust, with a richer tone that further enhances that irregular pulse. In terms of behaviour, a different management of exhaust gas flow can favour a more responsive throttle and, in certain riding conditions, a greater feeling of engine readiness.
The sleeve has a fixed length of 400 mm, chosen for optimal visual proportions on the Ténéré 700's profile.
We build every exhaust in our workshop with handcrafted manufacturing in Lombardy, in the province of Bergamo. Each piece is made to order and goes through internal quality control before dispatch. We operate direct from the manufacturer, without intermediaries: a direct relationship that allows us to maintain consistent quality standards and give every order the attention it deserves.
Every sports exhaust is supplied with a standard dB killer included. Our exhausts are homologated for road use throughout Europe and Switzerland: the homologation certificate is included and is valid with the dB killer fitted. Removing the dB killer invalidates the product's homologation. For those who want to reduce the sound level further, the No-Noise option is available, with an internally welded filter that provides a perceptible reduction in decibels without significantly affecting the exhaust's overall behaviour. The selection is made directly on the product page.
As this involves replacing only the end can on a fuel-injected bike like the Ténéré 700, no ECU remapping or modifications to the engine management are normally required. The engine management adapts to the new configuration without any particular electronic issues. Always check compatibility with your year of manufacture on the product page.
Updated production times are visible directly at checkout and may vary depending on the period. Once your order has been dispatched, you will automatically receive a tracking code to follow your parcel.
For any questions about fitting, compatibility or the differences between the available models, check our FAQ section or contact us via the Contact page or chat: we respond directly and without unnecessary delays.
Below you will find the product list available for the Yamaha Ténéré 700. Exhausts are compatible with specific years of manufacture: always check compatibility on the product page. The differences between the various sports exhausts are primarily aesthetic: body shape, material and finish. If desired, the No-Noise option can be selected directly on the product page. Visit the product page to view detailed photos, read the technical specifications and configure your exhaust.
